Phase 2 Motortrend

NOTEWhen installing please make sure to install the bracket labeled L and R in the right configurationL - LEFT DRIVER SIDE (LHD - USDM VEHICLE)R - RIGHT PASSENGER SIDE (LHD - USDM VEHICLE)

P2M Nissan S13/S14 street outer tie rods were designed and built to an upgrade over stock unit. P2M street outer tie rods were made with thicker casting than stock units. Unlike the pro outer tie...

P2M rear traction links for S13/S14 is constructed from high strength S45C alloy. The purpose of the rear traction links is to be able to adjust caster setting for the rear and also dial in alignment...

P2M pro outer tie rods for S13/S14 must be used in conjunction with P2M inner tie rods. The pro outer tie rods was constructed with S45C high strength steel alloy and comes with cone spacers to...

P2M S45C alloy offset rack spacers for S13/S14 helps torelocate the inner tie rods forward to reduce steering bind, most often thecase with drifting. The offset rack spacers will provide about +35mm...

P2M upgraded inner tie rods was revised and designed to be stronger than stock. The shaft body thickness was increased to withstand race and drift use where the stock rods has tendency to break. The...

P2M OE replacement front cover assembly for Nissan SR20DET RWD motor. Replacing your oil pump is critical for every engine rebuild to ensure proper oil pressure for your motor. Our P2M unit has the...

P2M V3 shifter kit is the grand daddy of all shifter for the KA24/SR20 (RWD) transmission. The V3 shifter was designed based off on V2 shifter but incorporate solid shifter bushing and shift lever...

P2M solid shifter bushing is made from bronze copper material that is much stronger than the stock nylon material bushing which breaks over time. The solid shifter bushing also stiffens up the...

P2M solid motor mounts were made with HRC-80 hardness urethane molded material to help keeping your engine steady at high rpm and high horsepower motors. By keeping the excessive engine vibrations at...

P2M subframe bushing insert can be used to compensate the old aged rear subframe bushing on the car by filling up the gap in the factory bushing. Made from CNC T6 aluminum material, has cut out for...

P2M Nissan SR20 - KA24 - CA18 upgrade solid transmission mount. Made from HRC-80 hardness urethane molded material to keep transmission from excessive vibration at high rpm or high horsepower output...

- Proprietary sourced fiber material with excellent thermal barrier properties- 3mm thickness / precision CNC cut to spec- Gasket material can withstand up to 220 deg. C (428 deg. F)- Controlled...

P2M 3pcs steel braided turbo lines were build to replace the turbo hard lines for S13 SR20DET. Utilize all AN fitting for ease of install on top mounted turbo setups. Oil line retain the stock banjo...

P2M 3pcs steel braided turbo lines were build to replace the turbo hard lines for S13 SR20DET. Utilize all AN fitting for ease of install on bottom mounted stock or aftermarket turbos. Oil line...

P2M OEM quality replacement metal intake manifold gasket specifically for S13 SR20DET.

P2M OEM quality replacement metal intake collector gasket for S13 SR20DET.

P2M new re-designed pulley kit for Nissan RWD S13 SR20DET engine- Made from T6-6061 aluminum forging material- Pulley kit is stock replacement and uses same factory belt sizes- Gun metal hard anodize...

P2M top feed billet aluminum fuel rail kit for S13 SR20DET motor. The fuel rail accommodate all 11mm opening top feed injectors (Denso or Injector Dynamics), and is a high volume rail over stock with...

P2M 2.25" polished aluminum hotpipe for S13 SR20DEt replace the 3pc factory 2" hotpipe. This hotpipe was built flanged for Greddy BOV install. All P2M hotpipe comes with complete couplers for install...

P2M OEM quality replacement metal turbo outlet 5 hole gasket for Nissan S13 SR20DET.

L

P2M high pressure power steering hose utilize a -6AN stainless steel braided PTFE hose with black external sleeve for additional protection. The line was built to replace the factory high pressure...

P2M Nissan S13 RUCA is made from high strength S45C steel alloy for strength with M12x1.25 RH rod end. The RUCA allow rear wheel camber to be adjusted for alignment purpose. Combo with rear...

P2M extreme drop rear toe rods were made to accommodate extremely lowered vehicles. Constructed from high strength S45C steel alloy, the extra bend in the body will give extra clearance from the rear...