×
close

Phase 2 Motortrend

P2M FT86 REAR UPPER CONTROL ARMS (NEGATIVE CAMBER)

click to zoom in

Phase 2 Motortrend

P2M FT86 REAR UPPER CONTROL ARMS (NEGATIVE CAMBER)

Write a Review
Part Number:
P2-RUCA2086-HC
MSRP:
Your Price: $545.00
P2M rear upper control arms for FT86 can be useful for extreme negative camber settings on the street. Combined with full adjustable rear suspension links precise adjust ability to your car's rear end suspension geometry can be achieved. Made from S45C steel tubing, 3pc teflon based rod end w/dust boot and a thick powder coated blue finish.

CAMBER ADJUSTMENT

- By default can go up to -6 negative camber.

- The arm is setup for NEGATIVE CAMBER adjustment ONLY. Please DO NOT run stock camber (0 to -1 deg) with this arm as it can be overly extended.

- It is RECOMMENDED to run between -3 to -6 deg of camber with this arm for preferred setting.

- By removing the first jam nut (nut in front of the turnbuckle) will gain additional -2 deg (for approximate total -8 deg camber)

- By removing the last jam nut (nut in the BACK of the turnbuckle) will gain additional -3 deg (for approximate total -9 deg camber)

- By removing BOTH jam nuts will achieve approximate -10 to -11 deg of camber

** DISCLAIMER: FOR ANYONE REMOVING THE JAM NUTS TO ACHIEVE NEGATIVE CAMBER PLEASE MAKE SURE THE ARMS MUST BE LOCKED INTO THE SHORTEST POSITION. DO NOT EXTEND THE ARMS WITHOUT JAM NUTS IN PLACE.
Weight:
0.00 LBS
fbt:
related products
5 customers are viewing this product
P2M FT86 REAR UPPER CONTROL ARMS (NEGATIVE CAMBER)

P2M FT86 REAR UPPER CONTROL ARMS (NEGATIVE CAMBER)

MSRP:
Your Price: $545.00
P2M rear upper control arms for FT86 can be useful for extreme negative camber settings on the street. Combined with full adjustable rear suspension links precise adjust ability to your car's rear end suspension geometry can be achieved. Made from S45C steel tubing, 3pc teflon based rod end w/dust boot and a thick powder coated blue finish.

CAMBER ADJUSTMENT

- By default can go up to -6 negative camber.

- The arm is setup for NEGATIVE CAMBER adjustment ONLY. Please DO NOT run stock camber (0 to -1 deg) with this arm as it can be overly extended.

- It is RECOMMENDED to run between -3 to -6 deg of camber with this arm for preferred setting.

- By removing the first jam nut (nut in front of the turnbuckle) will gain additional -2 deg (for approximate total -8 deg camber)

- By removing the last jam nut (nut in the BACK of the turnbuckle) will gain additional -3 deg (for approximate total -9 deg camber)

- By removing BOTH jam nuts will achieve approximate -10 to -11 deg of camber

** DISCLAIMER: FOR ANYONE REMOVING THE JAM NUTS TO ACHIEVE NEGATIVE CAMBER PLEASE MAKE SURE THE ARMS MUST BE LOCKED INTO THE SHORTEST POSITION. DO NOT EXTEND THE ARMS WITHOUT JAM NUTS IN PLACE.
Need help? We're available at940-222-5499 - Email us at[email protected] orlive help
to top